Fabric Test Methods and Measured Results

Use this table to compare the requirements listed for ZD2212 Air Layer Waffle with the evidence available for a sourcing decision.

Sample described on the sheet: white knit, 90% polyester / 10% spandex, width 130 cm, weight 140 ±5 gsm. Source: supplier sheet V01, dated 14 October 2026. This is the document date. The sheet does not identify a test laboratory, instrument, test date or specimen lot.

Test methods and reference values

ZD2212 supplier reference values
Parameter Methods listed Sample conditions listed Supplier reference
Stretch and recovery ASTM D2594 / ISO 14704 20 N, length and width Length 130% ±15%, width 86% ±15%. Recovery ≥85% in both directions.
Moisture management AATCC 195/197; GB/T 21655 Conditioning and method-specific grading not stated Grade ≥3; the sheet does not assign this grade to a specific method.
Ultraviolet protection AATCC 183 / AS/NZS 4399 Dry and wet listed UPF 50+; separate dry and wet readings not supplied.
Martindale abrasion ISO 12947 Load, abradant and endpoint not stated ≥15,000 cycles
Dimensional change after washing ISO 5077 / AATCC 135 Wash cycle and drying procedure not stated ±5%
Colour fastness to washing ISO 105-C06 / AATCC 61 Wash conditions not stated Colour change ≥4; staining ≥3.
Colour fastness to rubbing ISO 105-X12 Dry and wet rubbing Staining ≥4 dry; ≥3 wet.
Colour fastness to light ISO 105-B02 / AATCC 16 Exposure conditions not stated Refer to lab dip; no numerical grade supplied.
Sublimation fastness Sublimation migration / AATCC (number not stated) Not tested No result.

Request measured results for your fabric

Not every fabric has a complete set of test results available. We can arrange testing on request. Please specify the fabric code, colour, intended use and required method. Confirm bulk-order requirements separately.

Request testing for a specific fabric · Download the original ZD2212 sample sheet (PDF)